There are actually many ways to remove the ring. At the beginning, most people would not want to destroy the ring, so they could only squeeze it out. Usually we will first remove the ring in a lubricating manner, including soap, glycerin, or other oily products to achieve lubrication, but as time goes by, if it still cannot be removed within a few minutes, it will enter a swelling period. But generally the part of our ring stuck is at the joints, so just pushing the ring back to the proximal end can reduce swelling and restore blood flow. But sometimes the removal time is too long, which will cause the return vein to be blocked, which will begin to swell. Once the fingers become more and more swollen, the blood supply of the arteries will also be compressed. At this time, the ring can only be destroyed, otherwise it will be difficult to remove the ring.

If the ring is too hard to destroy or needs to be removed without destroying the ring, the method is to try to drive the blood from the far end of the finger back to the end of the ring. Therefore, raising your hands higher than the heart is a way to remove them after being less swelling. In addition, there are also binding them from the distal end to the proximal end in the form of plate lines or elastic rubber, and then slowly remove the ring after a period of time. However, if you are patiently using lubrication and rotation, under moderate local anesthesia, before the swelling is embedded in the skin, it can actually take a while to remove it, but the skin on the fingers will inevitably be damaged.

Secondly, if the ring is embedded in the skin and the ring cannot be moved, the above method will not work, so you can only use tools to remove it. There are several traditional tools used to remove rings. In addition to ring pliers, other destruction pliers can be used to cut the ring. However, when using tools to destroy the ring, the most feared thing is to encounter rings with too hard material. Sometimes, it is difficult to find destruction tools. Therefore, in addition to protecting the skin inside the ring during the destruction process, it is not an option to first make a gap in the ring, and then destroy it with more suitable tools along the gap. If these methods cannot remove the ring or the fingers are necrotic due to excessive ischemia, you can only go to the operating room to anesthetize the hand, then debride the fingers and remove the ring in the operating room.

When choosing a ring, you must choose an appropriate ring ring, and it is best not to be too hard to make cutting difficult. If you find that you are pregnant or gaining weight, you must pay attention to whether the ring you wore before is stuck in your fingers. Once you find that there is, it is best to remove it quickly before it is swollen. Otherwise, it will take some effort to turn the sausage back into a hot dog. Moreover, the skin on the hands will inevitably cause some damage during the removal process. Generally, fire brigades or medical institutions that provide emergency treatment can help the public handle these problems.

Share a few tips for picking up rings

If the soapy water cannot fade, your ring is really tight enough! Several methods are recommended, which should be able to solve your problem:

1. First of all, special attention should be paid: When the ring is difficult to take off, do not force it to take off — — if the ring is deformed, it will be even more difficult to get rid of it!

2. When your fingers are not swollen (otherwise you must first eliminate the swelling), use some ice to quickly cool your fingers to reduce the fingers when they are cold, then fully lubricate them with vegetable oil, and slowly remove the ring while rotating. Note: The fingers should not be kept in ice or cold water for too long, otherwise the fingers may become larger due to long soaking, making the ring more difficult to remove.

3. Spend about 10 yuan to buy a body lubricant at the pharmacy. The lubrication effect is much better than that of ordinary things, and it should make the ring fall off smoothly.

4. If neither of the above methods works, then your ring is very dangerous to you. If you don’t fall off for a long time, it may cause your finger necrosis. You should go to the hospital to solve the problem as soon as possible!

5. See if you can use a toothpick to pass through the ring? If you can, first soak your hands in ice water, then use a toothpick to pass through the ring, pass a line through the gap of the toothpick, and then wrap the fingers with the thread (to make the finger flesh solid), and after turning a width of one or two millimeters, exit the ring a little bit, and then continue to wrap it another one or two millimeters. And so on.