Sliding door selection knowledge - How to clean the sliding door?

Purchase knowledge of sliding doors

1. Listen to pulley vibration: The sliding doors have two sets of pulleys, upper and lower. When choosing, don’t mistakenly think that the sliding door slides the lighter the better when it slides. In fact, a good sliding door should have a certain weight when it slides, smooth without vibration.

2. Whether to use green and environmentally friendly materials. The artificial boards (fiberboard, particleboard, plywood) used to make furniture are often used because the adhesive with formaldehyde is used in the production process of the board, so formaldehyde is inevitably contained in finished furniture. According to international regulations, E1≤ 1.5mg/L, E2≤ 5.0mg/L. Therefore, when ordering sliding doors, be sure to find out whether the manufacturer's products are environmentally friendly. It is recommended that everyone choose well-known brand products.

3. Is the thickness of the door panel thick and the height sufficient? For wooden boards for sliding doors, it is best to choose 10mm or 12mm thick boards, which are sturdy, stable and durable to use; for those with a slightly worse board, they will choose 8mm thick, which will appear to be more frivolous; for those with a worse board, even 6mm thick boards, which are easy to deform and often difficult to meet normal requirements, and the height of the door panel determines whether it can be decorated to the ceiling. Maintenance of sliding doors

1. Maintenance of pulleys.

pulley is the soul of the entire inner door. Although it is small in size, it has a significant effect. Point one or two drops of lubricating oil every six months to keep it smooth. The pulleys of the sliding door are divided into upper and lower wheels, and there is no need to add lubricant, just pay attention to cleaning debris. If the pulley is a general brand or brand, and the pulley is a normal bearing or rubber wheel, lubricating oil should be added to its sliding parts every six months.

2. Protection of tracks.

Keep the track clean to prevent foreign objects from entering. If there is debris and dust, you can use a brush to clean it. The dust accumulation in the groove and door seal strips can be sucked away by a vacuum cleaner.

3. Protection of sliding doors.

Prevent gravity from hitting the door body, it is strictly forbidden to destroy the sliding door and track by sharp devices or gravity, causing obstacles; if the door body or frame is damaged, please contact the manufacturer or ask a professional maintenance worker to repair it.

4. Maintain good operating performance of sliding doors.

Sliding doors seem simple, but they still have many structures and accessories. In addition to the protection of tracks and other aspects, sealing strips and glass glue seals are the key structures to ensure the sealing, insulation and sound insulation of sliding doors. If they fall off, they must be repaired and replaced in time, so as to achieve the best effect of dust insulation, anti-collision, sound insulation and heat insulation.

Cleaning of sliding doors

1. Sandpaper, wire brush or other friction objects are not allowed to be cleaned. After cleaning, it must be washed with clean water, especially in areas with cracks and dirt. It must also be wiped with alcohol with soft cloth.

2. Regularly use a soft cloth to dip clean water or neutral detergent to clean the surface of the sliding door. Do not use ordinary soap and washing powder, and do not use strong acid and alkaline cleaners such as detergents such as detergent powder and toilet serum.

3. If the main material of the sliding door is made of a board material, the wet rag used during cleaning should not be too much moisture, just keep it moisturized.

4. Clean the slide groove regularly to keep the sliding door open and close smoothly.