Tips for cleaning a bathroom: Keep the bathroom ventilated
In home life, "bathroom" is a place that everyone must contact every day. It is a place where people remove dirt, clean themselves, and relieve stress every day. There is water and electricity in the bathroom, and it is also a cleaning place for people. Therefore, in order to get a comfortable bathroom space, cleaning is particularly important.
【1】The most important thing about cleaning and ventilation in the bathroom is to ventilation first. When using the bathroom, turn on the ventilation fan when not using the bathroom. When not using the bathroom, especially after bathing, the ventilation fan and the bathroom door should be opened at the same time to allow the air in the bathroom to flow so that the moisture in the bathroom should be removed as soon as possible. Keeping the bathroom ventilated can keep the bathroom dry. A non-ventilated bathroom will not only condensate the water vapor, become damp, moldy, and produce black spots on the faucet, so the unpleasant odor will also make people feel disgusted.
【2】Directant for cleaning tiles
The surface of the tiles is a layer of glass glaze. When cleaning, just use a damp cloth to dip it in detergent liquid and wipe it. Before wiping, be careful not to have sand, metal chips and other things on the wet cloth that are prone to scratch the tiles. If there is, they must be removed before they can be used. The caulking agent between the ceramic tiles is likely to turn black due to mold after use for a period of time. To eliminate this situation, you can mix the bleach with clean water in a ratio of 1:1, and then use an old toothbrush to dip it in to brush it. If it still fails to work, you can only dig out the old caulking agent and re-fille it.
【3】Don’t use boiling water to clean the toilet.
The toilet can be cleaned with brushes or sponges sold on the market, with neutral detergent plus water or warm water. Never use hot water to pour into the toilet to prevent the toilet from cracking. Pay special attention to the edge of the water ring and the drainage outlet below the water seal when cleaning, because these two places are the most likely places to hide dirt. When the toilet lid is dirty, you can wipe it with a cloth dipped in a neutral detergent solution. Never use gasoline, rosin, volatile liquids, acidic solutions or hot water to wipe the toilet lid.
【4】Acidic cleaning agents are not available for cleaning copperware.
Faucets and copperware are metal products with electroplated surfaces. They will cause rust and spots when used for a long time without wiping. Usually, you will clean it with detergent liquid and then wipe it with a soft cloth dipped in a little engine oil, which will be very bright. Never use acidic cleaners to wipe, otherwise it will erode the copperware.