How to clean the keyboard correctly Recommend a good tool for cleaning the keyboard
If the computer has not been cleaned for a long time, there will be a lot of dirt on the keyboard. The mood of surfing the Internet will be greatly reduced, and it will feel dirty. The surface of the computer key can be cleaned by wiping, but it will take a lot of effort. The most troublesome thing is the gap between the keys of the keyboard. The clean gap between the gaps is still very dirty, because the gaps cannot be reached, so it cannot be washed properly. Toothpaste, old toothbrush and wipe are good tools for cleaning the keyboard. Let’s take a look with the editor below.
How to clean the keyboard
1. In order to thoroughly clean the keyboard, first find a wipe cloth. The wipe cloth must be soft, so that it will not wear off the keyboard and damage the keyboard. Wet the wipe cloth with water, then dry it a little, wash the keyboard thoroughly. Do not use an too wet wipe cloth, because if water enters the space under the keyboard keys, it may cause damage to the circuit.
2. Squeeze a ball of toothpaste, about twice as much as you usually brush your teeth, apply part of it on a particularly dirty key, and apply part on a wet and dry wipe cloth, and then use the wipe cloth to clean the surface of the keyboard, so that the local area can be wiped for a longer time.
3. Squeeze a ball of toothpaste, and apply it to the palm of your hand. After dipping it with a toothbrush, brush it against the side of each key on the keyboard. For particularly dirty areas, you can first press the key next to it and then brush it. Dip the toothpaste one by one with a toothbrush until you are satisfied with the brush.
4. After washing each keyboard key with toothpaste, a lot of foam and dirt will be difficult to remove. This is a very important process. Use a toothbrush to clean water. In combination with the wipe cloth, the wipe cloth must be rubbed and dried to wipe away the dirt that is brushed out.
5. Further clean the dirt, put the dry wipe on your hands, brush the keyboard with a clean toothbrush and then the wiper. Scrub it repeatedly, and the toothbrush needs to be cleaned intermittently until it is basically cleaned.
6. After continuous scrubbing, there must be no dirt falling to the lower part of each key. In this way, you can brush the keyboard upside down, and swing it from top to bottom to wipe the dirt out with a wipe cloth, and then hang the keyboard upside down to allow a small amount of moisture to flow out.
7. After the keyboard is dry, wipe it clean with a wipe. After hard work, the keyboard is clean, just like the newly bought one. I feel much more comfortable when I go online. I will have an advertising slogan: Let your fingers dance on a clean keyboard. Haha~ Friends, please give it a try.
Keyboard selection matters
1. The touch of the keyboard is the most touching input device in daily life, the feel of the hand is undoubtedly the most important. The feel is mainly determined by the strength of the button. To determine the feel of a keyboard, you will test it from the aspects of whether the elasticity of the keys is moderate, whether the pressure on the keys is uniform, whether the key caps are loose or shaken, and whether the key stroke is suitable. Although different users have different requirements for the elasticity and key stroke of the key, a high-quality keyboard should meet the usage habits of most users in these aspects. Even the key stress and the firm key caps must be guaranteed, otherwise it may cause the key to be stuck or make the user feel tired.
2. The appearance of the keyboard
The appearance includes the color and shape of the keyboard. A beautiful and stylish keyboard will add a lot of color to your desktop, while an old-fashioned keyboard will make your work more dull. Therefore, for the keyboard, as long as you think it is beautiful, like it and practical.
3. The workmanship of the keyboard is low, but it does not mean that you can deal with it sloppy. The surface and edges and corners of a good keyboard are exquisite and delicate. The letters and symbols on the key caps are usually engraved by laser, and the hand feels concave and convex when touching. When purchasing, carefully check whether the printed marks on the keys are engraved. It is not the type that is printed directly with ink, because the writing of this keyboard will fall off soon. The corners of the keyboard should not be sharp. A regular keyboard has three indicators: CapsLock (letter case lock), NumLock (numeric keypad lock), and ScrollLock.
4. Keyboard key position layout
Although there are standards for keyboard key position distribution, various manufacturers still have room for maneuver in this standard. First-class manufacturers can use their experience to arrange the keyboard keys more considerately, while small manufacturers can only follow the most basic standards, and even make keyboards with extremely poor key distribution because of poor quality.
5. Keyboard noise
I believe that all users hate the noise generated by typing on the keyboard, especially those who are still working, gaming, and surfing the Internet late at night. Therefore, a good keyboard must ensure that only produces less noise when typing at high speed, and does not affect others' rest.